Stop leaks and restore your washing machine's performance with the Genuine C00764372 Detergent Dispenser Assembly.

This part is the internal "tank" or housing located at the top left of your washing machine. It connects to the incoming water valves and directs water jets into the soap drawer compartments. Over time, this unit can crack due to water pressure or become clogged with black mold and undissolved powder, restricting water flow.

Is this the part you need?

• Leaking: If water runs down the front of the machine from the soap drawer area during filling, the housing is often cracked or the internal seals have failed.

• Blockages: If your fabric softener remains in the tray after the wash, the water jets inside this housing may be calcified or blocked.

• Mold: If you cannot remove bad odors or black mold from the dispenser area, replacing the housing is the most effective solution.

Note: This is the Housing Assembly. It connects to the soap drawer (sold separately, though often reused) and the dispenser-to-tub hose

To Fit the Following models;

• Hotpoint:

  • NSWM Series: NSWM 743U, NSWM 863C, NSWM 963C, NSWM 1043C.

  • NM11 Series: NM11 823, NM11 946, NM11 1045.

  • BI Series: BI WMHG 71484, BI WMHG 81284 (Integrated models).

• Indesit:

  • BWE Series: BWE 71452, BWE 91484, BWE 101484.

  • MTWE Series: MTWE 81283, MTWE 91483.

  • IWC Series: Select late-model IWC units.

• Whirlpool:

  • FFB Series: FFB 7238, FFB 8248, FFB 9248.

  • FFD Series: FFD 8448, FFD 9448.